FUEL DISTRIBUTION SYSTEM MECHANIC

About the role

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION.

This position is located in a Logistics Readiness Squadron, Mission Support Group, Air National Guard Wing. DEFINITION OF AREA(S) OF CONSIDERATION: Area 1 = Enlisted members of the Louisiana National Guard.

What you will do

• (1) Inspects and tests fuel receiving, storage, and distribution facilities and performs preventive maintenance on fuel systems and components.
• Inspects fuel tanks and vents for proper ventilation.
• Checks interior and exterior of tanks for corrosion, leakage, contam ination, and sludge and correct operation of roof sumps, roof seals, liquid level gauges, product recovery systems, etc., and inspects gauging equipment for calibration.
• Performs corrosion control on exposed piping.
• Performs ground resistance tests and pressure checks system to identify leaks.
• Checks pumps for unusual noise, vibration, and proper operation.
• Performs hydrostatic tests on hoses.
• Tests and calibrates fuel flow meters, and checks manual and diaphragm valves for proper operation.
• Conducts diagnostic checks on sensors, alarm components, and emergency shutoffs.
• Inspects tank cleaning equipment such as portable pumps, respirators, air lines, harnesses, hoses, and compressors.
• Inspects entire fuel distribution system and components to detect possible explosive and toxic hazards and system deficiencies.
• Conducts follow-up inspections of contractor and in-house repairs.
• Maintains records of inspections, maintenance, and repairs, as required.
• (2) Performs all phases of liquid fuel system and component maintenance including preventive maintenance, troubleshooting, repair, and modification.
• Removes installs, repairs, and troubleshoots component parts of fuel systems to correct malfunctions of turbine, centrifugal, and rotary pumps, manually operated plug/ball valves, hydraulically­ operated diaphragm-type valves, pilot control systems, tank gauges and vents, filter separators, fuelflow meters, hydrant outlets, differential pressure gauges, and truck loading and fill connections.
• Performs modification of systems in accordance with applicable manuals, technical publications, and manufacturer's specifications.
• Lubricates valves and pumps; replaces gaskets and seals; corrects pumping equipment misalignment; cleans strainers and filters; services filter separators; and checks meters for correct delivery and calibration.
• Troubleshoots, overhauls, removes, and replaces high/low level controls, liquid level gauges, automatic fueling/defueling valves, pressure regulating valves, water drain valves, excess flow valves, pressure/vacuum vents, and roof seals and sumps.
• Cleans and purges equipment.
• Disassembles units and examines component parts for evidence of scratches, wear, cracks, pits, or breaks.
• Troubleshoots, repairs, and tests equipment installed in vehicle gas stations and truck loading fill stands.
• Performs liquid calibration of fuel storage tanks and flow meters.
• Measures, cuts, threads, joins, and fits piping as required to perform system modification or to repair/replace system components.
• (3) Troubleshoots and repairs problems in the electrical components of liquid fuel distribution systems.
• Performs electrical inspection of electro-mechanical components.
• Uses multi-meter to check system continuity and identify minor system problems.
• Replaces burned out fuses.
• Diagnoses, repairs, and adjusts electrical components such as electrical controls, motors, and other devices using electrical measuring equipment (e.g., voltmeters, ammeters, and ohmmeters).
• Examines motors, diagnoses defects, and makes on-site repairs when possible.
• Disconnects motors requiring major repair and transports to shop.
• Uses ohmmeter or megger instrument to test static ground throughout system.
• Adjusts, aligns, and calibrates gauges and meters to ensure maximum operating efficiency.
• Installs and performs pressure tests for operation of new, repaired, and modified components, valves, and controls.
• Performs inspection, maintenance, and repairs on all controls, switches, and connecting and ground cables.
• (4) Participates in cleaning the interior surface of bulk storage tanks, above and below ground, by entering tanks.
• Cleans interior surface and tests seams and other areas suspected of leakage.
• Performs corrosion control by removing corrosion and repainting surfaces.
• Removes and disposes of sludge.
• Follows safety precautions in tank entry, ventilation tasks, and in disposing of sludge.
• (5) Utilizes safety practices and procedures following established safety rules and regulations and maintains a safe and clean work environment.
• Uses and assures proper fit of required safety equipment (i.e., foot, eye, breathing, and ear protective gear) and clothing (i.e., cotton).
• Polices grounds, buildings, and pits to maintain area in accordance with fire prevention and security directives.
• (6) Performs other as duties as assigned.

Requirements

• 1) National Guard Membership is required.
• 2) Males born after 31 December 1959 must be registered for Selective Service.
• 3) Federal employment suitability as determined by a background investigation.
• 4) May be required to successfully complete a probationary period.
• MILITARY REQUIREMENTS: ENLISTED SECURITY CLEARANCE: Must maintain appropriate level of security clearance. ***LOUISIANA NATIONAL GUARD MEMBERS - Acceptance of this position may result in the loss of contracted incentive(s).
• For further details, contact the LANG State Incentive Manager, at *** (ARMY) 391-8336 (AIR FORCE). *** NOTICE: THIS EMPLOYER PARTICIPATES IN E-VERIFY: FEDERAL LAW REQUIRED ALL EMPLOYERS TO VERIFY THE IDENTITY AND EMPLOYMENT ELIGIBILITY OF ALL PERSONS HIRED TO WORK IN THE UNITED STATES.
• NATIONAL GUARD MEMBERSHIP IS REQUIRED: This is an excepted service position that requires membership in a compatible military assignment in the National Guard.
• Selectee will be required to wear the military uniform.
• Acceptance of an excepted service position constitutes concurrence with these requirements as a condition of employment.
• Participation in direct deposit is mandatory.

Education

You must provide transcripts and/or other documentation as proof to support your Educational claims, and receive credit to meet the Education requirements for this position.

How you will be evaluated

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are minimally qualified, your resume and supporting documentation will be compared to your responses on the assessment questionnaire to determine your level of experience.

If you rate yourself higher than is supported by your application package, your responses may be adjusted and/or you may be excluded from consideration for this position. If you are found to be among the top qualified candidates, you will be referred to the selecting official for employment consideration.

Your qualifications will be evaluated on the following competencies (knowledge, skills, abilities and other characteristics): Ability to Use and Maintain Tools and Equipment, Knowledge of Equipment, Structure, Materials, etc. (Includes Constructing, Repair, and Forging), and Troubleshooting

Documents you must provide

• To apply for this position, you must submit a complete Application Package which includes: 1.
• Your resume showing work schedule, hours worked per week, dates of employment and duties performed.
• Application Packet (Click Link To Download) and submit other supporting documents.
• OF 612 - "Optional Application for Federal Employment" (Click Link to Download) Submit only if you do not have a resume.
• Security Clearance Form (Please complete this form and submit if you do not have at least a "SECRET" security clearance.)

What to expect next

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.

Additional information

As a condition of employment for accepting this position, you will be required to serve a 2-year trial period during which we will evaluate your fitness and whether your continued employment advances the public interest.

In determining if your employment advances the public interest, we may consider: - your performance and conduct; - the needs and interests of the agency; - whether your continued employment would advance organizational goals of the agency or the Government; and - whether your continued employment would advance the efficiency of the Federal service.

Upon completion of your trial period your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.

If you are a male applicant who was born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you be registered or you are not eligible for appointment in this agency (***).

Payment of Permanent Change of Station (PCS) costs is not authorized, based upon a determination that a PCS move is not in the Government interest.