Home / Jobs / SURFACE MAINTENANCE MECHANIC INSPECTOR

SURFACE MAINTENANCE MECHANIC INSPECTOR

Army National Guard Units · Department of the Army · Camp Dodge Military Reservation, Iowa

Federal agencyWG-11
At a glance

A job with Army National Guard Units in Camp Dodge Military Reservation, Iowa. It pays $31.76–$37.07 per hour (annualised at 2,087 hours) at grade WG-11. Applications close on Oct 8, 2026 — 15 days left.

Working pattern
On site
Who can apply
Internal to an agency
Clearance
Secret

Main duties

  • As a SURFACE MAINTENANCE MECHANIC INSPECTOR, WG-5801-11 your duties are below.
  • Inspects a large variety of heavy-duty mobile equipment (i.e., combat, tactical, etc.) and automotive vehicles (i.e., attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc.).
  • May also inspect heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity.
  • May assist higher-graded inspectors to perform inspections on equipment repairs.
The original posting

Full details

About the role

IOWA ARMY NATIONAL GUARD - TITLE 32 EXCEPTED SERVICE POSITION This position is open to current on-board Title 32 employees of the Iowa Army National Guard. Military membership is required. LOCATION: CSMS.

Johnston, IA

What you will do

  • As a SURFACE MAINTENANCE MECHANIC INSPECTOR, WG-5801-11 your duties are below.
  • Inspects a large variety of heavy-duty mobile equipment (i.e., combat, tactical, etc.) and automotive vehicles (i.e., attack tanks, large cranes, tank retrievers, fire trucks, bridge transporters, armored vehicle launched bridges, bulldozers, road graders, crawler tractors, power shovels, self propelled earth compacting equipment, self propelled artillery, etc.).
  • May also inspect heavy artillery, small arms, powered support and other equipment or components of equal or lesser complexity.
  • May assist higher-graded inspectors to perform inspections on equipment repairs.
  • Inspects complex, interrelated mechanical, hydraulic, pneumatic, electronic and electrical systems, equipment and their components while in operation or in a standby condition.
  • Inspects and performs tests to braking, steering, and differential systems, which are mechanically integrated with the transmission; to large engines, which directly power multiple hydraulic and pneumatic systems; to intricate fuel injection systems; to turret stabilization systems; and to other systems combined in a single, complex mechanical assembly.
  • Uses specially designed testing methods and test equipment such as computerized test sets, precision gauges, electronic sensors, injector test stands, engine scopes, etc., to assure that tolerance and safety factors have been met.
  • Inspects equipment to determine repairs needed.
  • Utilizes established Maintenance Expenditure Limits (MEL) to evaluate economic feasibility of repair(s).
  • Considers a variety of factors such as cost and availability of parts, man-hours, and impact of time constraints on the mission to assess whether repair is economical.
  • Recommends to a higher echelon to condemn equipment when the repair costs exceed the established MEL.
  • Prepares lists of needed repairs, parts, and man-hours authorized.
  • Performs in-process inspections to assure that equipment is being repaired in accordance with pertinent requirements.
  • Performs final inspection, certifying that equipment is in satisfactory operating condition, or rejects the work and returns the equipment to the repair shop with specific reports prescribing additional repairs.
  • Serves as inspector on Command Maintenance Evaluation Teams (COMET) and/or as a member of Maintenance Assistance and Instruction Teams (MAIT).
  • Performs other duties as assigned.

Requirements

  • This is an excepted position that requires military membership in a compatible military assignment in the Iowa Army National Guard.
  • Selectee will be required to wear the military uniform.
  • Acceptance of this excepted position constitutes concurrence with these requirements as a condition of employment.
  • APPLICATION MATERIALS MUST BE RECEIVED BY 10/08/2026 .
  • FAILURE TO PROVIDE COMPLETE INFORMATION MAY RESULT IN YOUR NOT RECEIVING CONSIDERATION FOR THIS POSITION.
  • Please refer to the Qualifications and Evaluations Section of this Announcement to understand the qualification requirements, and the How to Apply Section for detailed instruction on applying.
  • SECURITY CLEARANCE REQUIREMENT: Employment is subject to attaining and maintaining a clearance as required by this position.
  • If the selectee does not possess the applicable security clearance when hired, application must be made within 30 days of the start date.
  • Failure to make application for the required security clearance will result in termination of employment.
  • Failure to complete prescribed courses may be cause for reassignment or termination of FTS.
  • Military Rank Requirements: WARRANT OFFICER AND ENLISTED MEMBERS (CW2 and Below)

How you will be evaluated

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration. Verbiage displayed on your resume or application must contain your own words.

You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed above.

Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.

Knowledge, Skills and Abilities required for this position: Extensive knowledge of the mechanical makeup, operation, and working relationships of complex interconnecting systems, assemblies, and parts for a variety of combat, tactical, commercial, special purpose vehicles and equipment.

Ability to diagnose, repair, overhaul, and modify interconnected complex systems on a variety of combat, tactical, commercial, special purpose vehicles and equipment.

Extensive knowledge of state of the art electrical, electronic, complex hydraulic, pneumatic, and other major non-mechanical systems that have a functional relationship and effect on the operation of major mechanical systems.

Extensive knowledge of hydraulic lifting, loading, turning, and positioning systems and their mechanical, hydraulic, pneumatic, electrical, and electronic controls.

Knowledge of electronics, sufficient to utilize state of the art diagnostic equipment to identify and replace defective components, such as electronic control modules, line replacement units, chips, sensors, printed circuit boards, and other standard components.

Ability to repair or overhaul major components such as diesel, multi-fuel or gasoline engines, turbine engines, automatic and manual transmissions, drive line assemblies, electrical and electronic systems and accessories, fuel injection systems, and emission control systems.

Skill to use a wide variety of test and diagnostics equipment to perform fault isolation and conduct repair of combat, tactical, commercial, special purpose vehicles and equipment. Ability to operate and understand original equipment manufacturer state of the art computerized diagnostic equipment and embedded diagnostics.

Knowledge and understanding of how measurements and tolerances impact on the mechanical, hydraulic, pneumatic, electronic, and electrical systems and the components of each system.

Skill and knowledge to develop or improvise methods, alter parts, and make repairs in the absence of technical guidelines (such as modifying parts to fit and mesh into systems for which the parts were not designed); improvise modifications to equipment to correct recurring malfunctions; and design modifications to meet special test requirements or other special needs.

Documents you must provide

  • Your resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed.
  • Additional Supporting Documents (if applicable): Cover Letter, Transcripts, DD 214, SF-50, ect.

What to expect next

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.

Additional information

ENLISTMENT CASH BONUSES: Acceptance of a technician position may affect any bonus and/or educational assistance that may be applicable. Please contact your Education Office prior to accepting a position with the Iowa Army National Guard. Participation in direct deposit is mandatory.

If you are a male applicant born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you are not eligible for appointment in this agency (***).

How to apply

GovHealthJobs indexes this posting from a public or licensed source and links back to it. Every application is submitted on the official employer or agency website under that organization’s own process and privacy terms. We are an independent information service — not a government body, agency, or hospital system — and we do not collect résumés or forward applications.

Open a free account to apply →

Registering is free and takes a minute. It unlocks the apply link, the contact details a posting carries, and email alerts.

Details on this page reflect the source posting as of Sep 24, 2026. Closing dates and salary ranges can change without notice — the official listing is always authoritative. How our coverage works.

Nearby

Similar jobs

Federal agencyWG-12

AIRCRAFT MECHANIC

Army National Guard Units

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This position is located in the Logistics function of an ARNG Army Aviation Support Facility (AASF).The AASF provides A…

📍 Pineville, Louisiana💵 $44.43–$51.84 per hour (annualised at 2,087 hours)⏳ Closes Oct 15, 2026
Federal agencyWG-09

SMALL ARMS REPAIRER

Army National Guard Units

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a SMALL ARMS REPAIRER, Position Description Number D1227000, and is part of the Mon…

📍 Helena, Montana💵 $35.75–$41.71 per hour (annualised at 2,087 hours)⏳ Closes Oct 9, 2026
Federal agencyGS-09

YELLOW RIBBON PROGRAM SPECIALIST

Army National Guard Units

THIS IS AN INDIANA NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION This position is part of the IN JFHQ IN J1, Indiana National Guard under Position Description Number D2020000. …

📍 Indianapolis, Indiana💵 $62,297–$80,991 per year⏳ Closes Oct 4, 2026
Federal agencyGS-09

HUMAN RESOURCES SPECIALIST (MILITARY)

Army National Guard Units

THIS IS AN INDIANA NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION This position is part of the IN JFHQ IN J1, Indiana National Guard under Position Description Number D3530000. …

📍 Indianapolis, Indiana💵 $62,297–$80,991 per year⏳ Closes Oct 8, 2026
Federal agencyWG-11

SURFACE MAINTENANCE MECHANIC

Army National Guard Units

THIS IS A NATIONAL GUARD TITLE 32 EXCEPTED SERVICE POSITION. This National Guard position is for a SURFACE MAINTENANCE MECHANIC, Position Description Number PDD1195000 and is part …

📍 Otis ANG Base, Massachusetts💵 $39.95–$46.60 per hour (annualised at 2,087 hours)⏳ Closes Oct 8, 2026

Browse every listing