SUPERVISORY NUCLEAR ENGINEER

About the role

You will serve as a SUPERVISORY NUCLEAR ENGINEER in the CONTROL ENGINEERING DIVISION, NUCLEAR ENGINEERING AND PLANNING DEPARTMENT (C2300) of PEARL HARBOR NSY AND IMF.

What you will do

• You will exercise full administrative and technical supervisory authority over subordinate supervisory engineers, branch leads, and a multidisciplinary team of professional nuclear, electrical, and systems engineers.
• You will establish work schedules, project milestones, and engineering priorities based on shipyard overhaul schedules, operational vessel availabilities, and fleet taskings.
• You will evaluate subordinate work performance, provide formal and informal performance ratings, and gives counsel, advice, and instructions on both technical and administrative matters.
• You will interview candidates for vacancies, recommend appointments, promotions, reassignments, details, and disciplinary measures, and resolve employee grievances and serious operational complaints.
• You will actively support and enforce federal, Department of Defense, Department of the Navy, and COMPACFLT Equal Employment Opportunity (EEO) policies and Merit System Principles.
• You will direct comprehensive engineering surveillance and technical coordination of all shipyard operations involving naval nuclear primary plant control systems and associated equipment across all active availabilities.
• You will systematically review daily and shift reports from engineering surveillance personnel maintaining round-the- clock technical oversight of shipyard nuclear production work.
• You will evaluate anomalies, determine root causes of operational defects or equipment deviations, and verify that corrective actions maintain complete reactor plant safety and radiological integrity.
• You will ensure all engineering surveillance activities strictly comply with technical work documents, radiological safety standards, NAVSEA directives, and Naval Reactors technical manuals.
• You will retain final approving authority as Division Head, while delegating approval authority to subordinate Branch Heads and Senior Engineers for technical work documents, operating procedures, and evaluations requiring divisional concurrence.
• You will prepare and submit authoritative technical evaluations and requests for formal deviation from established guides and military specifications when necessitated by unique shipyard overhaul conditions.
• You will serve as the primary shipyard technical consultant and representative on nuclear control engineering matters during high-level conferences, design reviews, and technical discussions with all representatives.
• You will secure formal review, technical concurrence, and mutual agreement between Naval Reactors Representative's Office , Ship's Force, and executive management involving ship safety, reactor plant safety, or shared shipboard operations.

Education

Applicants must meet the following basic education requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: Successful completion of a professional engineering degree.

To be acceptable, the program must: (1) lead to a bachelor's degree (or higher) in a school of engineering with at least one program accredited by the Accreditation Board for Engineering and Technology (ABET); or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. OR Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration For more information about EI and EIT registration requirements, please visit the National Society of Professional Engineers website at: *** OR Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico The FE examination is not administered by the U.

S. Office of Personnel Management. For more information, please visit: ***

OR Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and in engineering that included the courses specified in the basic requirements under paragraph A (above).

The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A (above) OR Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least one year of professional engineering experience acquired under professional engineering supervision and guidance.

Ordinarily, there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions.

How you will be evaluated

When the application process is complete, we will review your resume to ensure you meet the hiring eligibility and qualification requirements listed in this announcement.

You will be rated based on the information provided in your resume and application package, along with your supporting documentation to determine your ability to demonstrate the following competencies: DEVELOPING OTHERS INFLUENCING/NEGOTIATING MANAGING HUMAN RESOURCES NUCLEAR ENGINEERING ORAL COMMUNICATION WRITTEN COMMUNICATION This recruitment will utilize the following technical assessment tools: Structured Resume Review and Structured Interview.

You should list any relevant performance appraisals and incentive awards in your resume as that information may be taken into consideration during the selection process. If selected, you may be required to provide supporting documentation. Please follow all instructions carefully.

Errors or omissions may affect your rating or consideration for employment. All eligibility, qualifications, and time-in-grade requirements must be met by the closing date of this announcement.

Documents you must provide

• You are required to provide documentation that supports the eligibility and qualification claims made in your resume.
• You must submit the applicable documents listed here and those listed with the eligibilities you select in the announcement questionnaire with your application package.
• Applicants who do not provide supporting documentation that fully support their claims will not be referred to the hiring manager.
• Cover letter is optional.
• A complete resume is required.
• Resumes are restricted to no more than 2 pages.
• Illegible/unreadable resumes will not be considered.
• Your resume must show relevant experience, job title, duties and accomplishments.
• Your resume must show complete information for each job entry to support minimum qualifications.
• The following information should be provided in your resume: employer's name, starting and end dates (Mo/Yr), hours per week if experience was less than full time (35-40 hours per week), pay plan, series and grade level (e.g. GS-0201-09) for relevant federal experience.
• TIP: A good way to ensure you include all essential information is to use the Resume Builder in USAJOBS to create your resume.
• Are you applying for a promotion?
• For GS positions, to be considered for promotion, you must provide SF-50(s) that shows that you held the next lower GS grade for at least one year.
• SF-50s that have an effective date within the past year (e.g., General Adjustment SF-50 from this year or Within Rate/Grade Increases (WRI/WGI) SF-50 within a year) do not clearly show that you meet the one-year time-in-grade requirement.
• That means if you submit an SF-50 dated within the last year, you must submit another SF-50 dated more than one year ago to clearly demonstrate you meet the time-in-grade requirements.
• If you are a DoD employee, you can obtain a copy of your SF- 50(s) from MyBiz.
• Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials?
• Check the Conditions of Employment section above to see if any are required.
• If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package.
• Are you using education as a substitute for some or all of the experience requirement?
• Is there a basic education requirement for this position?
• Check the Education section above to see what is allowed and what is required.
• Any claims you make in your resume regarding education or degrees MUST be supported by submitting with your application official or unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school.
• While unofficial transcripts are acceptable for initial application, an official transcript will ultimately be required if you are selected for the position.
• You may submit a copy your degree(s) if specific coursework does not have to be verified.
• Are you a veteran claiming 5-point veterans' preference or claiming sole survivorship preference?
• You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service.
• If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service.
• If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too.
• If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor Are you a disabled veteran or claiming 10-point veterans' preference?
• If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference.
• You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). ***
• Are you an active duty service member?
• Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command.
• The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.).
• Application documents, including supplemental ones, may be shared outside the Human Resources Office.
• Supplemental documents may contain your SSN, DOB, or personal information of others (e.g., on military orders, marriage certificates).
• You may redact this information before submitting; however, if selected, you must provide unredacted originals.

What to expect next

When the application process is complete, your complete application will be reviewed to determine if you meet the hiring eligibility and qualification requirements for which you requested consideration.

You will be rated based on the information provided in your resume and technical assessments, along with your supporting documentation to determine your level of knowledge, skill, and ability related to the job requirements. Generally, only best qualified candidates will be referred to the hiring manager. Sometimes well qualified and minimally qualified candidates are referred.

Occasionally, candidates eligible for priority consideration are referred, and no other candidates are referred. The hiring manager may choose to conduct interviews. You will be notified of our rating and referral decision.

If you are referred, you will be notified when a hiring decision is made. NOTE: If you have any questions or need assistance, please contact the DON Employment Information Center at ***

Additional information

This position is covered by the Department of Defense Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

During the application process you will have the ability to opt-in to make your resume available to hiring managers in the agency who have similar positions in the local commuting area.

Depending on the hiring organization and the position being filled, job requirements (e.g., security clearance, travel, drug testing, financial disclosure filing, bargaining unit status, etc.) may vary.

Other hiring managers filling similar positions may offer relocation expense reimbursement and/or may offer recruitment incentives for new employees, depending on funding availability and in accordance with policy. If you opt-in and are referred on a certificate, your resume will be available to other hiring managers for 180-days from the date the job announcement closes.

Opting in does not impact your application for this announcement, nor does it guarantee further consideration for additional positions. Federal annuitant information: The selection of an annuitant is subject to the Department of Defense and Department of the Navy policy on the employment of annuitants.

Policy information may be found at: *** This position is subject to work an uncommon tour, including nights, weekends, and holidays to meet mission requirements. Overtime or night differential pay and/or unusual duty hours may be required.

PPP applicants will be placed at the FPL, if determined Well Qualified (WQ). To receive priority consideration, the FPL must be the same grade level or equivalent of the retained grade or the grade held immediately prior to separation.

ICTAP Applicants: To be considered well-qualified and exercise selection priority as an ICTAP candidate, displaced Federal employees must satisfy all qualification requirements for the position and receive a rating in the highly qualified category (score 85) or higher.

ICTAP candidates must provide copies of all of the following documentation at the time of application:?1) agency notice; 2) most recent performance appraisal; and 3) most recent SF-50 or notification of personnel action that includes position, grade level, and duty location. Applicants who do not provide this documentation will not receive consideration as an ICTAP candidate.

For more information about ICTAP eligibility please review the following link: *** Military Spouse Preference applicants will be placed at the highest grade for which they have applied and are determined Best Qualified (BQ).

A BQ military spouse possesses knowledge, skills, abilities, and competencies comparable to others who meet the competitive referral criteria for the specific position. Certain incentives (such as Recruitment, Relocation or Student Loan Repayment) may be authorized to eligible selectees.

A relocation incentive is generally a single payment intended to offset some of the relocation costs experienced by the selectee. A relocation incentive may be authorized.