PRINCIPAL TECHNICAL MANAGER, HEAD, SUBSEA AND SEABED WARFARE AND MARITIME OPERATIONS DEPARTMENT

About the role

You will serve as Principal Technical Manager (PTM) and Department Head for the Subsea and Seabed Warfare and Maritime Operations Department (Code S) and as the primary executive and technical authority for research, development, test and evaluation (RDT&E), rapid prototyping, and life-cycle sustainment of next-generation undersea and littoral warfare systems.

What you will do

• You will direct the scientific and engineering posture of the department to deliver revolutionary military technologies that increase combat effectiveness and warfighter lethality across coastal, subsea, and seabed operational domains.
• You will provide executive-level technical consultation, strategic guidance, and expert recommendations to senior military and civilian leaders.
• You will provide high-level scientific oversight and technical leadership for emergent research concepts and disruptive technologies.
• You will serve as the principal financial authority for the department, managing and executing a total annual operating budget authority exceeding $80 million.
• You will serve as an executive member of command dispute resolution boards, participates in civilian hiring committees for key executive vacancies, and represents the Division Technical Director in cross-warfare center operational coordination.

Education

Applicants must meet the following positive education qualifications requirements of the Office of Personnel Management (OPM) Qualifications Standards Manual: For 0801 Professional Engineering Series: A.

Degree: Engineering. Successful completion of a bachelor's or higher engineering degree from an accredited college or university.

To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

Such education must demonstrate the knowledge, skills, and abilities necessary to do the work of the position. -or- B.

Combination of education and experience -- college-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following: (I) Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT), or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration.

For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions; or (II) Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico; or (III) Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A.

The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A; or (IV) Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive.) For 1301-General Physical Science Series A.

Degree in physical science, engineering, or mathematics that included 24 semester hours in physical science and/or related engineering science such as mechanics, dynamics, properties of materials, and electronics; or B.

Combination of education and experience -- education equivalent to one of the majors shown in A above that included at least 24 semester hours in physical science and/or related engineering science, plus appropriate experience or additional education; OR For 1310-Physics Series: A. Degree in physics; or related degree that included at least 24 semester hours in physics; or B.

Combination of education and experience -- courses equivalent to a major in physics totaling at least 24 semester hours, plus appropriate experience or additional education; See Additional Information section for course clarification. For 1515-Operations Research Series: A. Degree in operations research; or B.

Bachelor's degree at least 24 semester hours in a combination of operations research, mathematics, probability, statistics, mathematical logic, science, or subject-matter courses requiring substantial competence in college-level mathematics or statistics. At least 3 of the 24 semester hours must have been in calculus. For 1520-Mathematics Series: A.

Degree in mathematics; or B. Degree equivalent of a major that included at least 24 semester hours in mathematics or combination of education and experience -- courses equivalent to a major in mathematics (including at least 24 semester hours in mathematics), as shown in A above, plus appropriate experience or additional education. For 1550-Computer Science Series: A.

Degree in computer science or B. Bachelor's degree with 30 semester hours in a combination of mathematics, statistics, and computer science. At least 15 of the 30 semester hours must have included any combination of statistics and mathematics that included differential and integral calculus.

All academic degrees and course work must be from accredited or pre-accredited institutions. An advanced degree of Master's or Ph.D. in one of the educational fields listed above is highly desirable.

How you will be evaluated

Once the application process is complete, a review of your resume and supporting documentation will be conducted. If you meet minimum qualifications, your Application Package will be further reviewed to determine if you possess the Technical Qualifications (TQ) listed above. TQs must be thoroughly addressed within your two (2) page resume.

Separate narratives will not be accepted or reviewed. Highly Qualified applicants may undergo one or more interviews and may be referred to the selecting official for further consideration. Additional documentation may be required in the interview/assessment process.

The technical panel will review results and make recommendations on final selections to the approving authorities. This recruitment will utilize the following technical assessment tools: Structured Resume Review and Structured Interview. If selected, you may be required to provide supporting documentation.

If after reviewing your resume and supporting documentation, a determination is made that you inflated your qualifications and/or experience, you may be found ineligible/not qualified. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

All qualifications requirements must be met by the closing date of this announcement.

Documents you must provide

• A complete application includes items described below.
• Please note that if you do not provide all required information, as specified in this announcement, you may not be considered for this position (or may not receive the special consideration for which you may be eligible).
• Please carefully review the following list to determine what documentation you need to submit.
• Some documents may not apply to all applicants.
• RESUME: All applicants are required to submit a resume limited to two (2) pages showing all relevant experience, duties and accomplishments.
• Applicants must include evidence of the TQs.
• PLEASE DO NOT USE USAJOBS RESUME BUILDER.
• CURRENT FEDERAL CIVIL SERVICE EMPLOYEE: Must provide a copy of your Notification of Personnel Action, Standard Form 50 (SF-50) or equivalent personnel action form reflecting you are a current Federal Civil Service employee.
• You are required to provide documentation that supports the eligibility and qualification claims made in your resume and assessment questionnaire.
• You must submit the applicable documents listed here and those listed with the eligibilities you select in the announcement questionnaire with your application package.
• Applicants who do not provide supporting documentation that fully support their claims will not be referred to the hiring manager.
• Cover letter is optional.
• Is there a basic education requirement for this position?
• Check the Education section above to see what is allowed and what is required.
• Any claims you make in your resume or assessment questionnaire regarding education or degrees MUST be supported by submitting with your application official or unofficial transcripts or a list of courses, grades earned, completion dates, and quarter and semester hours earned issued from your school.
• While unofficial transcripts are acceptable for initial application, an official transcript will ultimately be required if you are selected for the position.
• You may submit a copy your degree(s) if specific coursework does not have to be verified.
• Are you claiming membership in any professional organizations, or possession of a license, certificate or credentials?
• Check the Conditions of Employment section above to see if any are required.
• If you claim membership, license, certification, or credentials, you must submit a copy of said document in your application package.
• Are you a veteran claiming 5-point veterans' preference or claiming sole survivorship preference?
• You must submit a copy of your latest DD-214 Certificate of Release or Discharge from Active Duty (any copy that shows all dates of service, as well as character of service [Honorable, General, etc.] is acceptable) OR a VA letter that shows dates of service or service connected disability AND character of service.
• If you have more than one DD-214 for multiple periods of active duty service, submit a copy for each period of service.
• If you were issued a DD-215 to amend aforementioned information on the DD-214 you must submit that too.
• If you are not sure of your preference eligibility, visit the Department of Labor's website: Veterans' Preference Advisor Are you a disabled veteran or claiming 10-point veterans' preference?
• If you are eligible to claim 10 point veterans preference you must submit a DD-214 Certificate of Release or Discharge from Active Duty as described above for 5-point preference.
• You must also provide the applicable supporting documentation of your disability (e.g. disability letter from the VA) as described on Standard Form-15 (SF-15). ***
• Are you an active duty service member?
• Active Duty Service Members are required to submit a statement of service printed on command letterhead and signed by the command.
• The statement of service must provide the branch of service, rate/rank, all dates of service, the expected date of discharge and anticipated character of service (Honorable, General, etc.).
• Documents submitted as part of the application package, to include supplemental documents, may be shared beyond the Human Resources Office.
• Some supplemental documents contain personal information such as SSN and DOB and some documents such as military orders and marriage certificates may contain personal information for someone other than you.
• You may sanitize these documents to remove said personal information before you submit your application.
• You must provide an un-sanitized version of the documents if you are selected.

What to expect next

When the application process is complete, your complete application (resume, assessment questionnaire, and all supporting documents) will be reviewed to determine if you meet the hiring eligibility and qualification requirements for which you requested consideration.

You will be rated based on the information provided in your resume and responses to the questionnaire, along with your supporting documentation to determine your level of knowledge, skill, and ability related to the job requirements. Once your online application is submitted you will receive a confirmation notification by email.

After your application is evaluated by the Human Resources Office, you will receive another notification regarding the status of your application. The hiring manager may choose to conduct interviews. If you are referred, you will be notified when a hiring decision is made.

You will be notified of our rating and referral decision.

Additional information

Senior Scientific Technical Manager (SSTM) positions are positions which exceed the ND-05 (GS-15 equivalent). SSTMs provide a continuity of technical leadership and oversight that is needed to ensure long term stewardship of an organization's technical capabilities.

Typically, applicants for SSTM positions are expected to have a graduate degree, significant research or development experience, and a national or international reputation in his/her field and are recognized throughout the applicable community as a renowned expert. SSTM positions are in the competitive service.

This position is not covered by the Department of War Priority Placement Program. Additional vacancies may be filled by this announcement. A tentative offer of employment will be rescinded if the selectee fails to meet the pre-employment requirements, including failure to report to any of the scheduled appointments.

Federal annuitant information: The selection of an annuitant is subject to the Department of War and Department of the Navy policy on the employment of annuitants. Policy information may be found at: *** There are three key documents that contain important information about your rights and obligations.

Please read and retain these documents: Noncriminal Justice Applicant's Privacy Rights, for those who undergo an FBI fingerprint-based criminal history record check for personnel vetting, which includes Rap Back, FD-258 Privacy Act Statement - FBI (this is the same statement used when your fingerprints are submitted as part of your background investigation), and SEAD-3-Reporting-U.pdf (dni.gov), (applicable to those who hold a sensitive position or have eligibility for access to classified information)" Equal Employment Opportunity (EEO) Policy Statement: *** Employment Information Resources - Resource Center: *** Males born after 12-31-1959 must be registered or exempt from Selective Service (see ***)