ELECTRONICS MECHANIC

About the role

IOWA ARMY NATIONAL GUARD - TITLE 32 EXCEPTED SERVICE POSITION This position is open to current on-board Title 32 employees of the Iowa Army National Guard. Military membership is required. LOCATION: CSMS, Johnston, Iowa

What you will do

• As a ELECTRONICS MECHANIC, WG-2604-11 your duties are below.
• (1) Performs functional tests, analyzes performance and malfunctions, removes, installs, tests, maintains, modifies, performs alignments and troubleshoots the electronic, electrical, mechanical and hydraulic assemblies, modules, and interconnecting cables of a variety of combat and tactical equipment to include the M1 series main battle tank, M2/3 series Bradley fighting vehicle, Multiple Launch Rocket System (MLRS), TOW Missile System and the ATACMS Launch Loader Module (LLM).
• Utilizes Integrated Family Test Equipment (IFTE), Built In Test Equipment (BITE) and break out boxes (BOB) for fault isolation, verification, or adjustment of assemblies and modules.
• Repairs or replaces chassis mounted components on Unit Under Test (UUT).
• Performs Automatic Test Equipment (ATE) operations for fault isolation on LLM electronic modules, circuit cards, and assemblies to component level.
• Replaces faulty components on UUT printed circuit boards and power distribution systems.
• Utilizes oscilloscopes, signal generators, digital multi-meters, and other test equipment to locate, diagnose, and repair malfunctions.
• (2) Troubleshoots and repairs launch pod/container (LP/C), trainer rocket simulator modules, Missiles/Launchers Pod Assembly (M/LPA), trainer missile simulator modules, and various like items.
• Troubleshoots carrier electrical and power distributions systems as an integrated subsystem of the weapon system or equipment being repaired.
• Isolates faulty assemblies, cables, wiring harnesses and modules to component level for repair or replacement.
• Insures proper integration of information between carrier, Fire Control System (FCS), vehicle and equipment hydraulic and mechanical systems, secure digital communications system, and intercommunications system.
• Installs equipment modifications to system per technical work orders.
• Performs initial and final checks and may perform inspections when required of designated systems.
• May act as quality assurance/control inspector for other mechanics' work.
• Determines deficiencies in troubleshooting procedures for the equipment being repaired and makes recommendations for corrective action to technical manuals.
• (3) Performs field and limited sustainment maintenance to include installation, routine maintenance, repair, and overhaul of fixed and mobile operational communication and electronics systems, e.g., shelter mounted AM radio and teletype systems, shelter mounted single side band radio and teletype systems, shelter mounted radio relay and terminal systems, complex radar systems, interrogators, gun, rocket, and missile fire control, directional and digital computer systems, peripheral equipment, and related test equipment, and Modification Table Of Equipment (MTOE) authorized automation equipment.
• Repairs, aligns, and adjusts missile guidance control systems, infrared night vision sights, optical sights, and traversing units.
• Removes and replaces defective electrical, electronic, and mechanical components.
• Conducts inspections, diagnoses nature and extent of equipment malfunction.
• Determines whether equipment may be economically repaired or declared unserviceable, and performs required maintenance to restore to a serviceable condition various types of tactical computers, radio sets, and similar items.
• Repairs or salvages defective components.
• Isolates and diagnoses cause of circuit/component malfunction using signal string lists, schematics, standard, special, and electronic Test Measurement and Diagnostic Equipment (TMDE) or repair equipment.
• Uses associated field maintenance equipment in analytical maintenance procedures.
• Interprets complex schematic diagrams.
• Must exercise a high degree of judgment regarding methods and procedures for completing assignments, which may involve extending the use of conventional tools and equipment and improving changes to techniques, and procedures to reach specified parameters when factors such as temperature extremes, aging of equipment, or modification of circuits have changed operating conditions.
• Installs and applies equipment modifications when directed.
• (4) Uses various types of test equipment to include systems test sets and stands such as AN/GRM-122s, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators to localize trouble by component unit, by circuit within a component, and by element of a circuit.
• Uses special and common hand tools, power tools, and gauges to make intricate repairs.
• Fabricates items and parts for repair of mechanical and electronic equipment.
• (5) Performs administrative functions in establishing and maintaining maintenance records on equipment maintained or repaired.
• Assists in the preparation of requests for required repair parts.
• (6) Performs other duties as assigned D1205

Requirements

• This is an excepted position that requires military membership in a compatible military assignment in the Iowa Army National Guard.
• Selectee will be required to wear the military uniform.
• Acceptance of this excepted position constitutes concurrence with these requirements as a condition of employment.
• APPLICATION MATERIALS MUST BE RECEIVED BY 09/28/2026 .
• FAILURE TO PROVIDE COMPLETE INFORMATION MAY RESULT IN YOUR NOT RECEIVING CONSIDERATION FOR THIS POSITION.
• Please refer to the Qualifications and Evaluations Section of this Announcement to understand the qualification requirements, and the How to Apply Section for detailed instruction on applying.
• SECURITY CLEARANCE REQUIREMENT: Employment is subject to attaining and maintaining a clearance as required by this position.
• If the selectee does not possess the applicable security clearance when hired, application must be made within 30 days of the start date.
• Failure to make application for the required security clearance will result in termination of employment.
• Failure to complete prescribed courses may be cause for reassignment or termination of FTS.
• Military Rank Requirements: Warrant Officer and Enlisted (CW3 and below)

How you will be evaluated

Once the announcement has closed, your resume and supporting documentation will be used to determine if you meet the qualifications listed on this announcement. If you are found to be among the qualified candidates, you will be referred to the selecting official for employment consideration. Verbiage displayed on your resume or application must contain your own words.

You may refer to position descriptions, i.e. the general and specialized experience located within the vacancy announcement, to assist with describing work experiences; however, resumes or applications received in verbatim will not be considered. In your resume you will need to address the general and specialized experience listed above.

Please use as much detail as needed, giving dates (months and years) of the experience, position title and how the experience was gained. This information is needed to determine if you are qualified for the position.

Knowledge, Skills and Abilities required for this position: Comprehensive knowledge of operating electronic principles such as circuit elements, digital logic, microprocessors, core memory, interface circuits, digital data transmission, microwave, antennas, signal behavior, amplification, and display.

Ability to troubleshoot, install, repair, and maintain complex electronic systems where circuit theory must be used to understand the operation of individual circuits. Skill in developing new test and repair procedures for which none exist, and when possible improving existing procedures.

Ability to understand the interaction of a number of complex, interrelated circuits to determine the cause of a malfunction and the interaction of various factors. Extensive knowledge of electromechanical servo systems, pneumatics, hydraulics, and mechanical and electric motor systems and their effect on each other.

Skill in interpreting complex drawings, specifications, and schematics of complete systems to recognize the function and interconnections of the various assemblies and troubleshoot the systems from schematic, following signal paths trough a complex path of interconnections of components, assemblies, subassemblies, and connecting cable harnesses.

Knowledge and skill to modify systems by adding, altering, or removing components in order to standardize or alter the purpose of the equipment or to incorporate new features developed since the equipment was manufactured.

Skill in using a wide variety of electronic test equipment such as systems test sets, frequency meters, standing wave indicators, oscillators, ohmmeters, voltmeters, resistance bridges, and signal generators, and the use of special and common hand tools, power tools, and gauges.

Skill in applying this knowledge to adapt test procedures to available test equipment, to develop time efficient means to return equipment to operation. Skill in using gunner's quadrants, transits, levels, and theodolites to survey LP/C, M/LPA mounts, and SRP/PDS mounting bolts for exactness.

Skill to use recovery-rigging techniques to attach/secure hoists, slings, and lifting devices using authorized equipment to accomplish repairs. Ability to switch from one theory of operations to another or to combine theories depending on the type of system being repaired. Skill and knowledge to provide technical assistance and instruction.

Documents you must provide

• Your resume showing work schedule, hours worked per week, dates (format should include Month and Year) of employment and duties performed.
• Additional Supporting Documents (if applicable): Cover Letter, Transcripts, DD 214, SF-50, ect.

What to expect next

Once your online application is submitted you will receive a confirmation notification by email. Your application will be evaluated by the Human Resources Office to determine your eligibility for the position. After the evaluation is complete, you will receive another notification regarding the status of your application.

Additional information

ENLISTMENT CASH BONUSES: Acceptance of a technician position may affect any bonus and/or educational assistance that may be applicable. Please contact your Education Office prior to accepting a position with the Iowa Army National Guard. Participation in direct deposit is mandatory.

If you are a male applicant born after 12/31/1959 and are required to register under the Military Selective Service Act, the Defense Authorization Act of 1986 requires that you are not eligible for appointment in this agency (***).