Civil Engineer (Structural) - DIRECT HIRE

About the role

The employee serves as a structural engineer for the Federal Highway Administration (FHWA) Division office with responsibility for managing and promoting the Federal highway programs applicable to bridges and other structures within the State.

The employee coordinates and evaluates the structural programs and assists coworkers within the Division office in addressing technically complex or controversial issues on project specific applications related to structures.

What you will do

• Evaluate and promote improvements in the State's administration of Federal programs for bridges and structures and encourage the use of enhanced planning, design, and construction, preservation, inspection and maintenance practices for structures.
• Provide oversight of State compliance with the National Bridge Inspection Standards (NBIS) and the National Tunnel Inspection Standard (NTIS) and recommends improvements.
• Maintain and conduct an oversight program for bridges and structures under design and construction and ensure that there is full coordination with responsible Division staff and State representatives.
• Conducts engineering/special studies for evaluation of the State structures design and construction program and related matters; review and final acceptance of research proposals regarding structures, or structural materials; and process reviews with the State and/or Division office.
• The ideal candidate for this position is a seasoned mid-career structural engineering professional with project management experience in bridge design, bridge construction inspection, and bridge program management.

Requirements

• As a condition of employment for accepting this position, you may be required to serve a 1-year probationary period during which we will evaluate your fitness and whether your continued employment advances the public interest.
• In determining if your employment advances the public interest, we may consider: your performance and conduct; the needs and interests of the agency; whether your continued employment would advance the organizational goals of the agency or the Government; and whether your continued employment would advance the efficiency of the Federal service.
• Upon completion of your probationary period, your employment will be terminated unless you receive certification, in writing, that your continued employment advances the public interest.
• SELECTIVE SERVICE: Males born after 12/31/1959 must be registered for the Selective Service.
• GOVERNMENT TRAVEL CARD: This position involves travel.
• A government contractor-issued travel card will be issued and must be retained for official business only.
• BACKGROUND INVESTIGATION: A background security investigation is required for all selected individuals.
• Appointment will be subject to the applicant's successful completion of the security investigation and favorable adjudication.
• Failure to meet these requirements will be grounds for termination.
• PCS/RELOCATION/RECRUITMENT: Permanent Change of Station (PCS), Relocation, and Recruitment Incentive authorization varies by position/selection and a service agreement may be required.
• PROBATIONARY PERIOD: Applicants may be required to successfully complete a one-year probationary period (unless already completed).

Education

MANDATORY EDUCATION REQUIREMENTS: A.

DEGREE: ENGINEERING --To be acceptable, the program must: (1) lead to a bachelor's degree in a school of engineering with at least one program accredited by ABET; or (2) include differential and integral calculus and courses (more advanced than first-year physics and chemistry) in five of the following seven areas of engineering science or physics: (a) statics, dynamics; (b) strength of materials (stress-strain relationships); (c) fluid mechanics, hydraulics; (d) thermodynamics; (e) electrical fields and circuits; (f) nature and properties of materials (relating particle and aggregate structure to properties); and (g) any other comparable area of fundamental engineering science or physics, such as optics, heat transfer, soil mechanics, or electronics.

OR B.

COMBINATION OF EDUCATION AND EXPERIENCE -- College-level education, training, and/or technical experience that furnished (1) a thorough knowledge of the physical and mathematical sciences underlying engineering, and (2) a good understanding, both theoretical and practical, of the engineering sciences and techniques and their applications to one of the branches of engineering.

The adequacy of such background must be demonstrated by one of the following: 1. Professional registration or licensure -- Current registration as an Engineer Intern (EI), Engineer in Training (EIT)1 , or licensure as a Professional Engineer (PE) by any State, the District of Columbia, Guam, or Puerto Rico.

Absent other means of qualifying under this standard, those applicants who achieved such registration by means other than written test (e.g., State grandfather or eminence provisions) are eligible only for positions that are within or closely related to the specialty field of their registration.

For example, an applicant who attains registration through a State Board's eminence provision as a manufacturing engineer typically would be rated eligible only for manufacturing engineering positions. 2.

Written Test -- Evidence of having successfully passed the Fundamentals of Engineering (FE) examination or any other written test required for professional registration by an engineering licensure board in the various States, the District of Columbia, Guam, and Puerto Rico. 3.

Specified academic courses -- Successful completion of at least 60 semester hours of courses in the physical, mathematical, and engineering sciences and that included the courses specified in the basic requirements under paragraph A. The courses must be fully acceptable toward meeting the requirements of an engineering program as described in paragraph A. 4.

Related curriculum -- Successful completion of a curriculum leading to a bachelor's degree in an appropriate scientific field, e.g., engineering technology, physics, chemistry, architecture, computer science, mathematics, hydrology, or geology, may be accepted in lieu of a bachelor's degree in engineering, provided the applicant has had at least 1 year of professional engineering experience acquired under professional engineering supervision and guidance.

Ordinarily there should be either an established plan of intensive training to develop professional engineering competence, or several years of prior professional engineering-type experience, e.g., in interdisciplinary positions. (The above examples of related curricula are not all inclusive).

All applicants must meet the education requirements under A or B to qualify for applying to an engineering position.

Transcripts are required for this position.

How you will be evaluated

DESCRIBE YOUR EXPERIENCE: Please be clear and specific when describing your experience, as HR evaluates applications strictly on the facts provided and will not make assumptions. To receive full credit, your narrative responses must be written in paragraph format and explicitly match your resume.

Begin each response by listing the exact position title, organization, employment dates (MM/YYYY–MM/YYYY), full- or part-time status, average weekly hours, and federal series/grade (if applicable). Within the body of the paragraph, clearly describe your specific duties, actions taken, tools used, and measurable outcomes.

HR will cross-check these details against your resume; if your resume does not fully support every claim and timeframe, the experience will not be considered for credit, which may result in an ineligible determination. All applicants: Your application will be reviewed in two phases determine how you move forward in the hiring process.

Phase I: Your resume will be reviewed to determine your technical qualifications for this position based on the required specialized experience. ONLY two (2) pages of your resume will be reviewed. Additional information beyond your resume (e.g., cover letter, links embedded in your resume) will not be reviewed.

Applicants passing “Phase I” will move on to the “Phase II” of the assessment process where your application will be reviewed and rated based on the KSAs/Competencies listed in the vacancy announcement by a Subject Matter Expert (SME). You may preview questions for this vacancy.

Documents you must provide

• In accordance with the OPM memorandum titled Merit Hiring Plan, dated May 29, 2025, resumes with a maximum of two (2) pages in length will be accepted as part of your application.
• These should be legible and in a readable font size.
• A determination of your eligibility and/or qualifications will be based only on those two (2) pages.
• Your resume MUST contain specific information that can be used to make a qualification determination, including employment beginning and ending dates for each position, whether employment is Full-time or Part-time (e.g., Program Analyst, GS-343-11 | January 2009–Present | 40 Hours/Week) and position titles.
• If the position is/was in the Federal government, you will need to provide the position series and grade level.
• The resume should show relevant experience and education, as well as support the required specialized experience.
• Please visit: *** TRANSCRIPTS are REQUIRED as there is a stated education requirement for the series.
• The transcripts need not be official, but must show that you meet the stated education requirements, including specific major or class requirements.
• ENGINEERS: If you are applying to an engineering position and are qualifying based on possessing a current Professional Engineer (PE) license, or passing the Engineer in Training (EIT) exam, please provide a copy of PE license or written documented proof of passing the EIT.
• FOREIGN EDUCATION: If you are using education completed in foreign colleges or universities to meet the qualification requirements, you must show the education credentials have been evaluated by a private organization that specializes in interpretation of foreign education programs and such education has been deemed equivalent to that gained in an accredited U.S. education program; or full credit has been given for the courses at a U.S. accredited college or university.
• For further information, visit: *** CURRENT OR FORMER FEDERAL APPLICANTS: Submit SF-50 documentation proving your highest competitive grade, federal eligibility, and 52-week time-in-grade requirement.
• To pass HR validation, it's recommended to combine and upload these into a single PDF: Start Date: The SF-50 showing when you were originally appointed or promoted to the qualifying grade.
• End Date: An SF-50 dated at least 52 weeks later (e.g., a Within-Grade Increase, promotion, or subsequent action) to prove a sequential 52-week period.
• Warning on Incomplete Documentation: Do not submit an award or current-year annual pay adjustment SF-50 by itself.
• These do not prove your original entry date or grade.
• If your documents fail to conclusively prove a full 52-week history, you will be rated Ineligible.
• DISPLACED EMPLOYEES: If requesting consideration under the Career Transition Assistance Program (CTAP) or Interagency CTAP program (ICTAP), you must meet the standards for this vacancy and provide all of the following documents: your most recent performance appraisal, the proof of eligibility letter from the Agency, and your most current SF-50, displaying current series and grade.
• Qualified CTAP/ICTAP candidates receive priority and will be referred to the hiring manager.
• For more information, please review the OPM Employee's Guide to Career Transition.
• SPECIAL ATTENTION: To be considered, you must submit all required resume details and applicable documents by the closing date of the announcement.

What to expect next

You may check your application status by logging into USAJobs.com (Select "My USAJobs" and click "Applications". Within two weeks of the closing date, a Human Resources Specialist may evaluate your application. If evaluated, qualified candidates will be referred to the hiring manager.

If you are selected for an interview, the hiring agency will contact you directly. Once the position is filled, we will notify all applicants of their final status.

Additional information

The Fair Chance to Compete for Jobs Act prohibits the Department of Transportation and its Operating Administrations from requesting an applicant's criminal history record before that individual receives a conditional offer of employment.

In accordance with 5 U.S. Code § 9202(c) and 5 C.F.R § 920.201 certain positions are exempt from the provisions of the Fair Chance to Compete Act. Applicants who believe they have been subjected to a violation of the Fair Chance to Compete for Jobs Act, may submit a written complaint to the Department of Transportation by email at, ***.

To learn more, please visit our page at: The Fair Chance to Compete Act | US Department of Transportation This announcement may be used to fill additional positions if similar vacancies occur within 90 days of the issue date of the referral certificate.