Civil Engineer / Mechancial Engineer / Electrical Engineer

About the role

Click on "Learn more about this agency" button below to view Eligibilities being considered and other IMPORTANT information. The primary purpose of this position is: This is a formal Air Force intern position, established under the PALACE Acquire (PAQ) program which is under the Pathways Recent Graduate Program.

This position is centrally managed and funded by the Air Force Personnel Center, Civilian Career Management Directorate and administered by the Civil Engineer Career Team.

What you will do

• GS-810-07 (Civil Engineer) - Uses prescribed methods to perform specific, and limited work assignments that are normally minor phases of a broader assignment of a higher-grade engineer. - Uses computers/computer software such as information management programs, computer aided design and drafting (CADD) programs, and project tracking programs to assist higher grade engineers in solving engineering problems and facilitate the work. - Assists in coordinating projects with engineers in other disciplines or with architects. - Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
• GS-810-09 (Civil Engineer) - Participates in design work for new construction, renovations, and improvements to real property facilities including utility systems, utilizing a professional knowledge of civil engineering. - Prepares or participates in the preparation of architect and engineer (A&E) statements of work (SOW). - Coordinates projects with other engineers in other disciplines or with architects. - Keeps abreast of emerging technologies to ensure programmed development will not prematurely become obsolete. - In conjunction with the primary duty of engineering design, on a less frequent basis performs work in the construction management, programming/base development, and/or operations and maintenance (O&M) functions. - Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
• GS-0830-07 (Mechanical Engineer) - Uses prescribed methods to perform specific, and limited work assignments that are normally minor phases of a broader assignment of a higher-grade engineer. - Uses computers/computer software such as information management programs, computer aided design and drafting (CADD) programs, and project tracking programs to assist higher grade engineers in solving engineering problems and facilitate the work. - Assist in coordinating projects with engineers in other disciplines or with architects. - Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
• GS-0830-09 (Mechanical Engineer) - Participates in design work for new construction, renovations, and improvements to real property facilities, including utility systems, utilizing a professional knowledge of mechanical engineering. - Prepares or participates in the preparation of architect and engineer (A&E) statements of work (SOW). - Coordinates projects with other engineers in other disciplines or with architects. - Keeps abreast of emerging technologies to ensure programmed development will not prematurely become obsolete. - In conjunction with the primary duty of engineering design, on a less frequent basis performs work in the construction management, programming/base development, and/or operations and maintenance (O&M) functions. - Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
• GS-0850-07 (Electrical Engineer) - Uses prescribed methods to perform specific, and limited work assignments that are normally minor phases of a broader assignment of a higher-grade engineer. - Uses computers and computer software such as information management programs, computer aided design and drafting (CADD) programs, and project tracking programs to assist higher grade engineers in solving engineering problems and facilitate the work. - Assists in coordinating projects with engineers in other disciplines or with architects. - Complies with health, safety and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.
• GS-0850-09 (Electrical Engineer) - Participates in design work for new construction, renovations, and improvements to real property facilities, including utility systems, utilizing a professional knowledge of electrical engineering. - Prepares or participates in the preparation of architect and engineer (A&E) statements of work (SOW). - Coordinates projects with other engineers in other disciplines or with architects. - Keeps abreast of emerging technologies to ensure programmed development will not prematurely become obsolete. - In conjunction with the primary duty of engineering design, on a less frequent basis performs work in the construction management, programming/base development, and/or operations and maintenance (O&M) functions. - Complies with health, safety, and environmental rules and procedures and performs work in a manner that enhances the safety of the work environment.

Education

IF USING EDUCATION TO QUALIFY: If position has a positive degree requirement or education forms the basis for qualifications, you MUST submit transcripts with the application.

Official transcripts are not required at the time of application; however, if position has a positive degree requirement, qualifying based on education alone or in combination with experience, transcripts must be verified prior to appointment. An accrediting institution recognized by the U.S. Department of Education must accredit education. Click here to check accreditation.

FOREIGN EDUCATION: Education completed in foreign colleges or universities may be used to meet the requirements.

You must show proof the education credentials have been deemed to be at least equivalent to that gained in conventional U.S. education program.

It is your responsibility to provide such evidence when applying.

How you will be evaluated

Your application package (resume, supporting documents, and responses to the questionnaire) will be used to determine your eligibility, qualifications, and quality ranking for this position. Please follow all instructions carefully. Errors or omissions may affect your rating or consideration for employment.

BASIS OF RATING: Your application will be rated under the Cut Point procedures based on the extent to which the quality, depth, and complexity of your experience and education relate to the qualification requirements. Additional points are not added for Veteran's Preference; however, Veteran's Preference is considered where applicable.

Best Qualified Group: Candidates in this category possess exceptional skills and experience to exceed well above the minimum requirements. Fully Qualified Group: Candidates in this category possess good skills and experience above the minimum requirements. Basically Qualified Group: Candidates in this category meet the minimum education and/or experience requirements.

The resume/documents you submit must support your responses to the online questionnaire. If your application contradicts or does not support your questionnaire responses, you will receive a rating of "not qualified" or "insufficient information" and you will not receive further consideration for this job. For additional information on what to include in your resume, click here.

Applicants who meet the requirements for and apply as a non-competitive eligible that meet minimal qualifications and other requirements of this position, will be given consideration as a non-competitive candidate and will be referred unless blocked by an individual with priority/preference.

APPRAISALS/AWARDS: Hiring Managers use objective methods and consider previous performance appraisals and awards in the selection process. Current Federal Civilian employees should list any relevant performance related rating and/or awards in your resume. Applicants who disqualify themselves will not be evaluated further.

Documents you must provide

• The following documents are required and must be provided with your application.
• Applicants who do not submit required documentation to determine eligibility and qualifications will be eliminated from consideration.
• Other documents may be required based on the eligibility/eligibilities you are claiming.
• Click here to view the AF Civilian Employment Eligibility Guide and the required documents you must submit to substantiate the eligibilities you are claiming.
• Online Application: Questionnaire Resume: Your resume may NOT exceed two pages, and the font size should not be smaller than 10 pts.
• You will not be considered for this vacancy if your resume is illegible/unreadable.
• Additional information on resume requirements can be located under "How To Apply".
• Transcripts/Registration/License: If qualifying on education/position requires education, you must submit copies of your transcripts and if required for the position, submit an active, current registration/license.
• Veterans: If claiming VEOA, VRA or 30% Disabled Veteran - Submit VOW certification memo or copy of the official DD Form 214, which must include the character of service (i.e., with an honorable or general discharge).
• This will be annotated in block 24 on member copy 2, 4, or 7 of the DD Form 214.
• If claiming 30% Disabled Veteran, you must also submit a VA Letter or a disability determination from a branch of the Armed Forces.
• NOTE: All veterans claiming 10-point preference must also submit a SF-15 form.
• ACTIVE DUTY SERVICE MEMBERS: The VOW Act requires federal agencies to treat an eligible active duty service member as a veteran, disabled veteran, and preference eligible (as applicable) when applying for civil service positions before the effective release or discharge date.
• Appointment of military members before the release or discharge date is permissible if the member is on terminal leave.
• At the time the active duty member applies for a civil position, he or she must submit a "certification" memo in lieu of a DD Form 214, Certificate of Release or Discharge from Active Duty.
• Active duty members applying for a civil service position without submitting a valid certification memo or DD Form 214 with their application will render the member ineligible for the position.
• The certification memo must originate from the member's military service branch on official letterhead and contain the following: Name/Rank/Grade of Service Member Branch of Armed Forces Dates of Active Service (Start and End Date(s) Expected Date of Discharge/Release from Active Duty Terminal leave start date (if applicable) Expected character of service (honorable or general) and type of separation (i.e. separation or retirement) Must be certified within 120 days of anticipated discharge Signature by, or by direction of the adjutant, personnel office, unit commander, or higher headquarters commander.
• Note: The VOW Act provides tentative preference.
• If appointed, a DD Form 214 must be submitted upon receipt.
• OPTIONAL DOCUMENTS: Performance Appraisals for Current Federal Civilian Employees - Most recent performance appraisals (dated within last 3 years) showing the official rating of record, signed by a supervisor, or statement why the performance appraisal is unavailable.
• Awards for Current Federal Civilian employees - List any awards received within the last 3 years on the resume.
• Note: Applicant must not submit award Notification of Personnel Actions (SF50s).
• Interagency Career Transition Assistance Program (ICTAP): For information on how to apply as an ICTAP eligible click here.
• To be well-qualified and exercise selection priority for this vacancy, displaced Federal employees must be rated well qualified or above for this position.
• You must submit a copy of the agency notice, your most recent performance rating, and your most recent SF-50 noting position, grade level, and duty location.
• Employed Annuitants (Reemployed Annuitants): Applicants in receipt of an annuity based on civilian employment in the Federal Service are subject to the DoD Policy on The Employment of Annuitants.
• Click here for more information.
• Direct Deposit: All federal employees are required to have direct deposit.
• If you have questions regarding this announcement and have hearing or speech difficulties click here.
• Tax Law Impact for PCS: On 22-Dec-2017, Public Law 115-97 - the "Tax Cuts and Jobs Act of 2017" suspended qualified moving expense deductions along with the exclusion for employer reimbursements and payments of moving expenses effective 01-Jan-2018 for tax years 2018 through 2025.
• When you perform a Civilian Permanent Change of Station (PCS) with the government, the Internal Revenue Service (IRS) considers the majority of your entitlements to be taxable.
• Visit GSA Bulletin FTR 20-04 here for additional information.

What to expect next

Once your application package is received an acknowledgement email will be sent. If you provided an email address, you will receive an email message acknowledging receipt of your application. Your application package will be used to determine your eligibility and qualifications for consideration.

If you are determined to be ineligible or not qualified, your application will receive no further consideration. To check the status of your application or return to a previous or incomplete application, log into your USAJOBS account, select My Applications, and click on the more information link under the application status for this position.

If you do not provide an email address, you are responsible for checking status updates and notifications in USAJOBS. Hard copy notifications will not be sent to you.

Additional information

KSA's Continued 0830-09 (Mechanical Engineer) Professional knowledge of mechanical engineering concepts, principles and practices and familiarity with other engineering disciplines. Knowledge of engineering and construction standards, methods, practices, and techniques.

Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions. Ability to analyze, interpret, and apply rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions.

Ability to plan and organize work and coordinate with other engineering disciplines and architects. Ability to communicate effectively, both orally and in writing, maintain good working relations. 0850-07 (Electrical Engineer) Professional knowledge of electrical engineering concepts and professional principles and standard engineering.

Skill in preparing graphs, curves, or tables. Ability to search technical reports, manufacturers' catalogs, and other guidelines to obtain information. Ability to use relevant software programs and use computer aided design and drafting programs (CADD).

Ability to work cooperatively as a team member in the design of electrical systems. Ability to make calculations applying standard formulas; and record factual data in tests and observation studies. 0850-09 (Electrical Engineer) Professional knowledge of electrical engineering concepts, principles, and practices.

Knowledge of standard contracting regulations, practices, and procedures. Knowledge of automated data processing concepts, systems capabilities, and economic usage to effectively accomplish assigned functions. Knowledge of health, safety, and environmental requirements as outlined in applicable standards, regulations, and/or technical orders.

Ability to analyze, interpret, and apply rules, regulations, and procedures in a variety of situations and recommend timely and economical solutions. Ability to plan and organize work and coordinate with other engineering disciplines and architects; communicate effectively, both orally and in writing; and maintain good working relations.

For DHA Positions: These positions are being filled under Direct-Hire Authority for the Department of Defense for Post-Secondary Students and Recent Graduates.

The Secretary of the Air Force has delegated authority by the Office of the Secretary of Defense to directly appoint qualified post-secondary students and recent graduates directly into competitive service positions; these positions may be professional or administrative occupations and are located Air Force-Wide.

Positions may be filled as permanent or term with a full-time or part-time work schedule.

Pay will vary by geographic location.*** The term "Current post-secondary student" means a person who is currently enrolled and in good academic standing at a full-time program at an institution of higher education; and is progressing toward a baccalaureate or graduate degree; and has completed at least 1 year of the program.*** The term "recent graduate" means a person awarded a degree by an institution of higher education not more than 2 years before the date of the appointment of such person, except in the case of a person who has completed a period of obligated service in a uniform service of more than 4 years.